Production

Tarmeko Spoon AS is a veneer producer specialized in the production of rotary cut birch veneer. For us, everything starts with the birch logs. We are situated in Estonia where Silver birch (betula pendula) is the most common tree. We are FSC®-certified and are preferring log suppliers who support sustainable forestry.

The logs are soaked in a pool before the veneer can be peeled from them.

After soaking the birch logs are debarked. Then they are sent to the lathe where birch veneer is peeled from them. The log is centered on a lathe and turned against a broad cutting knife set into the log. Our peeling line enables us to produce veneer up to the length of 1900 mm. This is also the grain length. The maximum veneer width can be 2500 mm.

After peeling the veneer is fed into the dryer. Kiln drying ensures stable humidity of the veneer.

We check the moisture contents of our veneer with a moisture analyzer from Sartorius, that uses the oven-dry method. This method is said to be the only reliable method to determine the humidity. Handheld moisture meters are only trying to estimate the oven-dry moisture content.

After drying the veneer is sorted according to the customer requirements. Usually, we put A and B grade together on the same pallet and C grade on separate pallets.

The veneer is packed onto pallets and the packs are labelled. Then the veneer is ready for loading and transport.

The veneer can be cut to size or narrower stripes can be put together with glue threads. The threads are put onto one side of the veneer. They keep the narrower veneer pieces in place. Such composed veneer sheets can effectively be used as core layers in plywood or bed slats.

The veneer is produced on customer orders.